Saab Sport Sedan Concept Black

Youngho Jong is a Korean design student, he taken Saab to looking towards future as sport sedan for 2025 Advanced Warning System Vehicle concept: a rakish, four-door saloon with coupe-like styling. And no headroom, by the looks of it, but that’s a forgivable oversight. More interesting to us, however, is how he used his knowledge of nature and human psychology to come up with a vehicle that isn’t just smart, it’s downright sinister.

With his research showing that 50% of vehicles accidents are caused by carelessness, excessive speed and tailgating, Jong wanted to create a car that would warn other drivers to back off and drive with care.

Saab Sport Sedan Concept Black

There are following the 2025 concept, slits open up in its rear panels revealing amber hazard lights, patches of the car’s skin also darken. The same amber slips are found on the front and sides of the vehicle. Jong took his inspiration from nature’s Fire Salamander, which uses its bright, menacing colours to ward off potential predators.

Jong also mentions that the Saab Sport Sedan Concept Study’s skin is constructed of a soft, impact absorbing material that reduces pedestrian injuries and vehicle damage in collisions. He incorporate sharp edges and the colours red and yellow to further emphasises the possible danger.

Car Seat IBE Concept by Modern Technologi

 

Car Seat IBE Concept by Modern Technologi

Now, you can see photos of Seat IBE Coupe Concept showed at Paris Motor Show. Improvements over the first Seat IBE Concept, which was shown in Geneva earlier this year, include refinements to the design and technology, while the Paris Show car now also sports an interior.

Both exterior and interior are characterised by their focus on key elements, by a clear and precise architecture, by modern technology and by materials that are as high-quality as they are ecological.

Come with measuring in at just 3.83 meters (12.5 ft) in length, it is smaller than Volkswagen’s Scirocco. Utilizing a 75 kw (102 hp) electric drive system, the concept is good for 130 km (81 miles) on a single charge. Acceleration from 0 to 100 km/h (0 to 60 mph) can be achieved in 9.7 seconds.

While its exterior design has been tweaked with a restyled lower fascia and new LED headlamps and tail lights. Furthermore, the car is now finished in a more eye-catching cherry-red color.

Car Seat IBE Concept by Modern Technologi

 

 

Ford Kuga Concept Car

 

Ford Kuga Concept Car

 

Ford preparing the concept version of Kuga crossover and Escape SUV for next year’s Detroit Motor Show. The new compact-sized crossover model will go into production in the second half of 2012 as a 2013 model.

“The Kuga/Escape successor could hit Deutschland’s showrooms as early as March next year and reach other European markets by the second quarter.” Bernhard Mattes said. He is man in charge of Ford’s German factories.

Moving production to the U.S. is another point on Ford’s agenda. It’s likely that the new car will be manufactured in Louisville, Kentucky, while the German factory in Saarlouis will keep the European production of the new Focus.

Ford Kuga Concept Car

 

 

Ferrari 458 Challenge Car Tuning

 

Ferrari 458 Challenge Car Tuning

The 458 Challenge boasts a host of upgrades over its road-legal sibling to make it race worthy when it hits the grid in Ferrari’s one-make race series from 2011. The Ferrari 458 Challenge will make world premiere at the 35th edition of the Bologna Motor Show in Italy, which runs for the public from December 4 to 12.

Ferrari is also displaying a variety of other racing models from the past and present at its Bologna Motor Show stand, including a 430 GTC owned by the AF Corse team Ferrari and an F1 model.

Ferrari’s engineers have made modifications to the gear ratios and calibration of its dual-clutch F1 gearbox to further improve torque at lower revs. While the Challenge keeps the 458 Italia’s direct injection 4.5-liter V8 with an output of 570 hp at 9,000 rpm intact.

 

 Ferrari 458 Challenge Car Tuning

 

Ferrari 458 Challenge Car Tuning  

The Ferrari 458 Challenge is equipped with the E-Diff electronic differential already employed on the road-going version, a first for Ferrari’s track-only cars. Another first for a Ferrari Challenge model is the adoption of the firm’s F1-Trac traction control system. The race-spec model also gets a specific suspension set-up with steel uniball joints, stiffer springs, single-rate alloy dampers and a ride height lowered by 50mm all round.

Stopping power is provided by the new generation Brembo CCM2 brakes integrated with the latest ABS system which debuted on the 599XX, Ferrari’s experimental laboratory car, while it rides on centre-nut 19-inch forged rims wrapped in larger dimension Pirelli slicks.

Result of combined is the improvement of the car’s lap time at Fiorano by two seconds over that of its predecessor, resulting in a new record of just 1’16.5”. According to the Italian company, the amount of lateral grip the new car generates is 1.6G. Read also about this car’s detail at previous post..

Ferrari 458 Challenge Car Tuning

 

 

New Kahn Audi Q7 Car

 

New Kahn Audi Q7 Car

This is the first time Kahn Tune projects into Audi Q7. Taking inspiration from another in-house project and in particular the Range Rover Sport RS600, the self-proclaimed “king of aesthetic conversions” created a complete body kit for the German SUV, alongside a few interior appointments.

The exterior design of Kahn Audi Q7 are wide Arched Body Kit features extra-wide wheel arch extensions, front vented wings, redesigned bumpers and a discrete, roof-mounted wing, all painted in Pearl Soft White. A set of 22-inch Kahn RS-X alloywheels complete the exterior updates.

While the interior using black quilted leather with red stitching. Other interior goodies include aluminum sport pedals, a Panoramic Glass Roof and a custom speedometer and rev counter.

New Kahn Audi Q7 Car